Wireless Solar Siren For Alarm System
Dear Friend, welcome to my shop, all products in my shop have passed quality certification, we have professional testing process when the product in inbound and outbound, all the accessories and the host are matched well, you can use it directly after you receive the goods, if you have any questiones when use it, we will be very patient help you to solve at the first time.There are several hundred kinds of products in my shop, Sincerely hope you can find the products you want, thank you!
1.If you want connects the solar siren with your alarm system, we advice you choose the 315MHz
2. If you want connect the solar siren with your sensor, such as the door sensor, PIR sensor, smoke sensor, we advice you choose the 433MHz
If you need more accessories, please see the following links in detail
1. Wireless emergency sound and light alarm
2. Sirens integration design, on-site alarm, the host with sound and light alarm and flash at the same time, more warning,
3. You don’t need wiring, no host, easy installation, simple operation, loud alarm voice
4. The alarm system cost-effective, 120 decibels, flashing warning, built-in battery, Not afraid of the rain and lightning
Please tear the protective film before the first time to use it,
The appearance of fashion, waterproof design, suitable for indoor and outdoor use
High brightness flash, high decibel siren integration design, warning more intense
Is the mainframe and high-power light siren, more extensive applicability
Learning to code, expand the detector is more flexible
Support 100 wireless detector input
Support two-way cable input, high availability, low level trigger the alarm
Prevent damage and power cord cutting acousto-optic alarm design, high safety coefficient
1. back cover for Install the
3. The solar panels
4. Alarm flash LED
Standby current: <10mA
Solar charging current: 155mA
External current (12V / 1.2A)
Charging current: 310mA
Radio frequency: 433MHz
wireless receiving distance(Open area): more than 80 meter
Work environment: 10-40 degree
Built-in battery: 8.4V / 2300mA
1. Applicable occasions: agricultural shed, kraal, shops, homes, shops, garage, warehouse
2. Installation instructions: between the host and each detector without wires, won’t destroy your home interior decoration;Installation is simple to learn, The built-in instructions,very simple to use.
3. Users can neatly add magnetic door window magnetic sensor, smoke sensor, gas sensor, infrared detector, remote control and so on according to the installation place of alarm .
Use guide (Pair the code)
Connect wireless transmitters and alarm host first
1. In standy mode, press the CODE KEY about 2 sencod, the LED1 will flash,and the siren make a “bi” sound, then loosen the button, the system will enter code pairing status
2. In code pairing status, press the any key on the remote controller,then if you can hear the siren make a “bi” sound, it say that code pairing successfully, if you hear a “bi,bi”sound, it say that the remote controller have been pairing coded before.
3. Exit the code pairing status, press the CODE Key ,and hold it about 2 second,then the LED1 will flash LED and you can hear a “bi” sound,it say that system has exit the code pairing status.
4. Delete the code, press the code key for a long time, after you hear a “bi” sound,keep press it, then you wll hear a “bi,bi”sound,it say that all code is delete.
1. Remove the bracket needs to be installed at a fixed location
2. Remove the screw on the back shell
3. Remove the shell
4. Solar panels
5. Cover chimney section
6. PCBA board waterproof cover
Install it outside:
1 * Wireless Flash Red Light Siren